@article { author = {jokar, Mohammad and Lari, Kamran}, title = {Study of Tidal Currents using MIKE21 Model and Field Measurements and the FES Global Model in the Persian Gulf}, journal = {Scientific- Research Quarterly of Geographical Data (SEPEHR)}, volume = {25}, number = {100}, pages = {97-110}, year = {2017}, publisher = {National Geographical Organization}, issn = {2588-3860}, eissn = {2588-3879}, doi = {10.22131/sepehr.2017.24809}, abstract = {Abstract Tidal field data is very important in coastal engineering researches such as developing the beaches, calibration of Numerical hydrodynamic models, hydrography, sediment transport and other things.The aim of this study is to evaluate and validate numerical hydrodynamic modeling by using field measurements of tidal measuring stations and to find a level tidal model in the Persian Gul. Therefore, bathymetry and coastline data and one year data of ten tidal measuring stations in the Persian Gulf and the wind field GFS were used for this purpose.Tidal currents were simulated using FM[1] software MIKE21 with irregular mesh structure and considering the astronomical forces, and verified by the results of the station measurements. In the next step, the tidal components were extracted. The simulation of the Persian Gulf's tidal current with the MIKE model was very well adapted to the field data of the tide measuring stations.In the final stage, the values provided by the FES global model were extracted using Matlab software. The results of the tidal analysis derived from the global oceanic tide model were evaluated and compared with the results of the tidal analysis derived from the modeling (results from the tide measuring stations). Based on the results in the study area, the tidal components obtained from the global oceanic tide model in the coastal and shallow zones, showed a low correspondence and accuracy with the tidal components of the tide measuring stations. This is despite the fact that less difference was observed between the corresponding components in deep areas.   1-       Flow Model    }, keywords = {Tidal levels,Tidal Currents,Mike Model,Persian Gulf}, title_fa = {بررسی جریان های کشندی با استفاده ازمدل MIKE21 و اندازه گیری های میدانی ومدل جهانی FES در خلیج فارس}, abstract_fa = {در مهندسی سواحل  اطلاعاتمیدانی به هنگام و کافی از وضعیت کشندی برای مواردی نظیر توسعه سواحل، کالیبره کردن مدل‌های هیدرودینامیکی عددی، هیدروگرافی، انتقال رسوب و سایر موارد از اهمیت ویژه‌ای برخوردار است. هدف از این پژوهش ارزیابی و صحت سنجی مدل هیدرودینامیکی عددی کشندی در آب‌های خلیج فارس با استفاده از اندازه‌گیری‌های میدانی  در ایستگاه‌های کشندسنجی و دستیابی به الگوی ترازهای کشندی می‌باشد. در همین راستا از داده‌های عمق‌سنجی و خط ساحلی و اطلاعاتیک ساله ده ایستگاه کشندسنجی درخلیج فارس ومیدان باد  GFS[1] استفاده شد. از مدل Flow Model)FM) نرم افزار MIKE21 با ساختار مش نامنظم و با در نظرگرفتن نیروهای نجومی جریان‌های کشندی شبیه‌سازی شد و با نتایج اندازه‌گیری‌های ایستگاه‌ها صحت سنجی به عمل آمد. در گام بعدی مؤلفه‌های کشندی استخراج شد. شبیه‌سازی جریان کشندی خلیج فارس  با مدلMIKEتطابق بسیار خوبی با  داده‌های میدانی ایستگاه‌های کشند سنجی نشان داد. در مرحله پایانی مقادیر ارائه شده توسط مدل جهانیFES با استفاده از نرم افزار Matlab استخراج شد. نتایج آنالیز کشندی حاصل از مدل جهانی کشند اقیانوسی با نتایج آنالیز کشندی حاصل از مدل‌سازی (نتایج حاصل از ایستگاه‌های کشند سنجی) مورد ارزیابی و مقایسه قرار گرفت. براساس نتایج در محدوده مورد بررسی، مؤلفه‌های کشندی بدست آمده از مدل جهانی کشند اقیانوسی در نواحی ساحلی وکم عمق تطابق و دقت کمی با مؤلفه‌های کشندی ایستگاه‌های کشند سنجی  را نشان داد این در حالی است که در  مناطق عمیق اختلاف کمتری بین مؤلفه‌های متناظر مشاهده گردید.  Global Forecast System}, keywords_fa = {ترازهای جزرومدی,جریان های جزرومدی,مدل Mike,خلیج فارس}, url = {https://www.sepehr.org/article_24809.html}, eprint = {https://www.sepehr.org/article_24809_dec62bf0317ead82ef656a33c4eecd4d.pdf} }