@article { author = {Farajzadeh, Manuchehr and Ahadnejad, Mohsen and Targholizadeh, Hadi}, title = {Analyzing the spectral response of urban constructed textures in reflective bands and the factors affecting that, before and after the earthquake (Case study: Bam)}, journal = {Scientific- Research Quarterly of Geographical Data (SEPEHR)}, volume = {27}, number = {108}, pages = {45-60}, year = {2019}, publisher = {National Geographical Organization}, issn = {2588-3860}, eissn = {2588-3879}, doi = {10.22131/sepehr.2019.34617}, abstract = {Extended Abstract Introduction  Due to the large dimensions of earthquake damages and losses, more rapid procedures are required to identify damaged buildings. Field studies and old procedures are no longer efficient enough because of being time consuming, costly and requiring lots of workforce. This research seeks to identify the buildings damaged by earthquakes through analyzing the spectral response of urban houses to the reflective bands and effective factors, before and after the earthquake, for recognizing buildings damaged in the earthquake and compare the results of the reflective bands with each other, and then, determine the most efficient band among them. The earthquake stricken city of Bam was selected as the case study of this research. In order to identify the damaged urban houses, satellite imagery and remote sensing reflective bands were considered for detecting the changes, distinguishing the bands, and analyzing the spectral reflection profile.   Materials and Methods  The high resolution Quick bird satellite, photographed the city of Bam just eight days after the earthquake on January 3, 2004. The satellite also had taken a clear image of Bam about three months before the earthquake on September 30, 2003, that, with regard to the objectives of the research and the capabilities of the images taken, these Quick Bird satellite images were selected to study and investigate in this field. The method of this research is to analyze the spectral reflection profile and the factors affecting it. Since the multi-spectral remote sensing is a set of reflective, emissive or backscattering energy from the study area in electromagnetic multi-spectral bands, the aim of this research is to describe why terrestrial phenomena show different responses to the electromagnetic spectrum, and to analyze their spectral curve as well. To this end, we established an analytical strategy to achieve a better interpretation of the blue (band 1: 450 - 520 nm), green (band 2: 520 - 600 nm), red (band 3: 630 - 690 nm), and infrared (band 4: 760 - 900 nm) reflective bands. And the earthquake stricken city of Bam was selected as the case study of this research in order to identify the damaged urban houses by analyzing the spectral reflection profile and factors affecting it.   Results and Discussion Urban housing is composed of various materials (concrete, asphalt, metal, plastic and soil) by man in various ways for building houses. When earthquake strikes, these houses might be destroyed. Therefore, satellite multi-temporal images before and after the earthquake were selected as data for analyzing the electromagnetic spectrum curve of the study area. In this research, the vulnerability of urban houses is different from one place to another. Therefore, educational samples of the case study from different parts of the city such as those which have been completely destroyed, partially destroyed or have remained intact, were selected. Then, the spectral response analysis of the urban houses was carried out in 4 blue (band 1: 450 - 520 nm) green (band 2: 520 - 600 nm) red (band 3: 630 - 690 nm) and Infrared (band 4: 760 - 900 nm) reflective bands before and after the earthquake in order to identify effective factors and the bands independent of these factors comparing with other bands. The results show that, before the earthquake occurs, some factors such as shadows cause a sharp decrease in the reflection in all bands, the atmospheric scattering at short wavelengths with increasing spectral reflection, the angle of sunshine, type of material, the surface smoothness or roughness of the surface, the time of the day, the height and texture had a great impact on the 3 blue, green and red reflective bands. Infrared band with a rectangular shape in spectral curve is a band independent of the aforementioned factors (with the exception of the shadow and surface smoothness of the materials).   Conclusion The results obtained from analyzing the spectral response of the urban houses in four reflective bands (Blue, Green, Red and Infrared) indicated that in general, the urban houses had high reflection and shadows had less reflection before the earthquake. After the earthquake, urban houses showed an irregular and significant reduction in spectral reflection, and the spectral reflection curve was irregular as well. However, the method of analyzing the spectral reflection profile is a point estimation method and does not result in a map, and this method is often used to check the accuracy of other methods.  }, keywords = {The spectral response,Spectral reflection profile,Urban houses,Remote Sensing,Reflective bands,Bam}, title_fa = {تحلیل پاسخگویی طیفی بافت های ساخته شده شهری در باندهای انعکاسی و عوامل مؤثر بر آن، قبل و بعد از زلزله مطالعه موردی: زلزله بم}, abstract_fa = {با توجه به ابعاد وسیع خسارات و تلفات ناشی از زلزله در مناطق شهری و نیاز به سرعت عمل بیشتر در شناسایی مساکن آسیب دیده، در این میان سنجش ازدور و تصاویر ماهواره‌ای به دلیل ویژگی‌های خود، همچون اشراف کلی بر پدیده‌ها و منابع زمین و ثبت ویژگی‌های پدیده‌ها در دوره‌های زمانی مختلف در طیف‌های الکترومغناطیسی گسترده، توسط سنجنده‌ها، ابزاری ارزشمند برای مطالعه سریع مناطق آسیب دیده می‌باشند. بنابراین با بکارگیری تصاویر ماهواره‌ای Quick Bird قبل و بعد از زلزله و داده مکانی، به تحلیل پاسخگویی طیفی بلوک‌های شهری، در باندهای انعکاسی و عوامل مؤثر بر آن، قبل و بعد از زلزله، با هدف شناسایی کاربردی‌ترین باندهای انعکاسی در برآورد خسارات وارده بر اثر زلزله، پرداخته شد. در این تحقیق، با توجه به اینکه آسیب‌پذیری از مکانی به مکان دیگر متفاوت است و شرایط چه از لحاظ وسعت و چه از لحاظ ساختار کالبدی که دارای انواع بافت قدیم و جدید و بافت‌های خانه باغی و... می‌باشد؛ با انتخاب چندین نمونه- موردی از بلوک‌های شهری که در بخش‌های مختلف شهری همچون بافت قدیم یا بافت جدید قرار دارند و در اثر زلزله یا کاملاً تخریب شده‌اند، یا خسارات جزیی دیده‌اند و یا اینکه بدون هیچ گونه خساراتی سالم مانده‌اند، به تحلیل پاسخگویی طیفی و عوامل مؤثر بر پدیده انعکاس این بلوک‌های ساختمانی در چهار باند انعکاسی پرداخته شد. نتایج نشان می دهدکه در باند مادون قرمز انعکاسی بدلیل ماهیت متفاوت خود و همچنین داشتن طول موج بلندتر نسبت به سایر باندهای انعکاسی، زلزله کمترین تأثیر را در پاسخگویی طیفی بافت‌های ساخته شده دارد. بنابراین با تحلیل پاسخگویی طیفی این باند نمی‌توان خسارات حاصل از زلزله را، دقیقاً برآورد کرد ولی با تحلیل پاسخگویی طیفی پدیده‌ها در سه باند آبی، سبز و قرمز، می‌توان خسارات وارده بر بافت‌های ساخت‌شده شهری را، با دقت بیشتری برآورد کرد.}, keywords_fa = {پاسخگویی طیفی,بافت های ساخته شده شهری,باندهای انعکاسی,سنجش از دور,زلزله بم}, url = {https://www.sepehr.org/article_34617.html}, eprint = {https://www.sepehr.org/article_34617_ef7e4df1167d2898a8e8af0a3abfc22c.pdf} }