Scientific- Research Quarterly of Geographical Data (SEPEHR)

Scientific- Research Quarterly of Geographical Data (SEPEHR)

Introduction and quality-based Assessment of LIDAR Data

Document Type : Research Paper

Authors
Ahmad Javaheri 1
Ali Mohammadpour 2
1 Master of Photogrammetry
2 Ph.D. in Geography, University of Theran
Abstract
Today, numerous active and inactive sensors are busy taking information from objects and ground features, and produce varied information from objects at different wave-lengths and with different resolutions. Potentially, each one of these pieces of information can be utilized as one of the sources of supplying triple spectral, textural and geometrical (structural) components. Owing to the ability of LIDAR sensor to provide with geometric information as well this sensor’s recent advent, we have examined the potentials and different behaviors of this sensor in detecting various ground features.
1- An Introduction to Laser Scanning" Surveying Engineering Department Ferris State University.
2- Michael Crane, et All 2002,"Report of the U.S. Geological Survey Lidar" Remote Sensing Program, 2002.
3- Greeal, M.S, et all 2002, "Global Positioning System, Inertial Navigation and Integration". John Wiley.
4- Wehr A., Lohr U. ,1999., "Airborne laser scanning-an introduction and overview"., ISPRS journal of Photogrammetry & Remote Sensing 54, 68 - 82.
5- Toposys Gmbh, URL http://www.toposys.com/
6- دکتر فرهاد صمدزادگان، احمد جواهرى، بهینه‏سازى در فضاى توصیف به منظور افزایش دقت طبقه‏بندى، سازمان نقشه‏بردارى، ژئوماتیک 86.
7- احمد جواهرى، 2005، طبقه‏بندى عوارض سه بعدى با استفاده از یک روش تلفیق اطلاعات در سطح عارضه، پایان‏نامه کارشناسى ارشد، دانشکده فنى دانشگاه تهران.
Scientific- Research Quarterly of Geographical Data (SEPEHR)
Volume 18, Issue 69
Spring 2009
Pages 24-27