Geographic Information System (GIS)
Abolfazl Ghanbari; Mostafa Mousapour; Habil Khorrami hossein hajloo; Hossein Anvari
Abstract
Extended AbstractIntroduction:The urban space is the most important human-made spatial structure on the planet earth. The history of urban development shows the path of human development, political system evolution and technological, technical and industrial developments. The physical development of ...
Read More
Extended AbstractIntroduction:The urban space is the most important human-made spatial structure on the planet earth. The history of urban development shows the path of human development, political system evolution and technological, technical and industrial developments. The physical development of urban areas is one of the main drivers of global changes that have important direct and indirect effects on environmental conditions and biodiversity. In the process of physical development of the city, due to the transformation of natural and semi-natural ecosystems into impermeable surfaces, it often causes irreversible environmental changes. One of the new approaches in urban planning is the use of remote sensing techniques and geographic information system. The emergence of remote sensing and machine learning techniques offers a new and promising opportunity for accurate and efficient monitoring and analysis of urban issues in order to achieve sustainable development. The process of processing satellite images can generally be divided into two approaches: pixel-based image analysis and object-based image analysis. The pixel-based analysis technique is performed at the level of each pixel of the image and uses only the spectral information available in each pixel. On the other hand, the object-based analysis approach is performed on a homogeneous group of pixels, taking into account the spatial characteristics of the pixels. One of the basic problems in urban remote sensing is the heterogeneity of the urban physical environment. The urban environment usually includes built structures such as buildings and urban transportation networks, several different types of vegetation such as agricultural areas, gardens, as well as barren areas and water bodies. Therefore, in the pixel-based processing approach, the existence of heterogeneity in the urban biophysical environment causes spectral mixing and also spectral similarities in the classification operation of satellite images in such a way that in a place where a pixel is If the surrounding environment is different, it causes Salt and Pepper Noise. Therefore, according to the problems in the pixel-based processing approach, the aim of this research is to compare the accuracy of machine learning algorithms based on object-based processing of satellite images in extracting the physical development area of Hamedan city using Sentinel 2 satellite image.Materials & Methods: The remote sensing data used in this research is a multi-spectral satellite image with a spatial resolution of 10 meters from the Sentinel 2 satellite, including bands 2 (blue), 3 (green), 4 (red) and 8 (near infrared) related to the date is the 23 of August 2023 in the city of Hamadan. The image of the Sentinel 2 satellite was downloaded from the website of the European Space Agency. In ENVI software, the pre-processing operation was performed on the satellite image. Then, in the eCognition software, the segmentation process was performed based on the appropriate scale, shape factor, and compression factor with the aim of producing image objects. After segmenting and converting the image into image objects, using machine learning classifiers based on object-oriented processing of satellite images including Bayes classification algorithms, k-nearest neighbor, support vector machine, decision tree and random trees, the classification process was carried out and maps of urban physical development area were produced. After the segmentation operation and the production of visual objects, three classes of built-up urban land, vegetation and barren land were defined, and some of the built objects in the segmentation stage were selected as training points and some were selected as ground Truth points.Results & DiscussionAfter downloading the satellite image from the website of the European Space Organization, in order to apply the radiometric correction of the image and also with the aim of matching the value of the gray levels of the image with the value of the real pixels of the terrestrial reflection, the gray levels are converted to radiance and then, using atmospheric correction, to coefficients. They became terrestrial reflections. In order to apply radiometric correction, Radiometric Calibration tool was used, and to apply atmospheric correction, FLAASH model was used in ENVI software. In order to classify the satellite image based on machine learning algorithms based on object-based processing, eCognition software was used. The satellite image of the study area, which was pre-processed and saved in TIFF format, was called in the environment of this software and saved as a project. In order to produce visual objects, segmentation operations were performed in different scales, shape factor and compression ratio to reach the most appropriate segmentation mode. In this step, the multiple resolution segmentation method was used to segment the image. The most appropriate segmentation included the scale of 100 and the shape factor of 0.6 and the compression factor of 0.4. Because in scales higher than 100, the construction of the visual object was not done correctly, so that several distinct complications were placed in one piece, and in scales less than 100, in some cases, one complication was placed in several pieces. In order to classify the generated image objects, machine learning algorithms were defined separately and after training each algorithm, the classification operation was performed. In this step, the classification was done based on the nearest neighbor method and by selecting the average and standard deviation parameters for each image band. After producing a map of the city physical development range through machine learning classifiers based on object-based processing of satellite images, the classification accuracy of each of the used algorithms was calculated. In order to calculate the accuracy of the above algorithms in eCognition software, using selected ground Truth control points, the overall accuracy and kappa coefficient were calculated for each of the algorithms.Conclusion:Based on the results of the research, it is possible to produce a map of Hamedan's urban physical development using machine learning algorithms based on object-based processing of satellite images with acceptable accuracy. Also, among all the algorithms used in this research, k-nearest neighbor with overall accuracy of 97% and kappa coefficient of 0.96 provided more accuracy.
Remote Sensing (RS)
Seyedeh Kosar Hamidi; Asghar Fallah; Nastaran Nazaryani
Abstract
Extended AbstractIntroductionVarious Climate factors considerably affect the environment and different vegetation covers show different levels of sensitivity to climate factors in the spatial-temporal scale. Data specifically collected from vegetation cover plays an important role in micro and macro ...
Read More
Extended AbstractIntroductionVarious Climate factors considerably affect the environment and different vegetation covers show different levels of sensitivity to climate factors in the spatial-temporal scale. Data specifically collected from vegetation cover plays an important role in micro and macro planning and information generation. Methods using air temperature recorded in weather stations to estimate the relative heat in urban areas are considered to be both time-consuming and costly. On the other hands, data with relatively high spatial resolution are capable of measuring ground surface parameters more efficiently and accurately. Thus, remote sensing technology is now considered to be a solution used to improve previously mentioned methods. Remotely sensed data are now widely used to find the quantitative relationship between patterns of vegetation cover and the elements of climate. Predicting the conditions of vegetation cover is considered to be essential for planners seeking an efficient plan for its exploitation and protection.Materials & MethodsThe present study seeks to investigate the effects of climatic factors on the vegetation trend observed in Frame forest in Mazandaran province using Sentinel 2 images and to determine the most suitable index for this area. Climatic Data collected from the nearest weather station in Farim City have been used to model climate factors (temperature and precipitation). Changes in the height above mean sea level were also considered. Following the pre-processing and processing of the Sentinel 2 images, the corresponding digital values were extracted from the spectral bands and applied as independent variables. ENVI software was used for image processing and STATISTICA and R software were used for modeling. 70% of the resulting data were used for training and the rest were used for testing or evaluating the model. Mean square error, correlation, Akaike Information Criterion (AIC) and Bayesian Information Criterion (BIC) were used to evaluate the presented models. Models with the highest correlation and the lowest standard error, the mean square error, the Akaike information evaluation criterion and the Bayesian evaluation criterion were selected as the best models for the studied variables.Results & Discussion A correlation coefficient of 0.43 and 0.56 was observed between temperature and precipitation and vegetation indices. AIC and BIC values equaled (565 and 3209) and (739 and 3383) respectively. Differential Vegetation Index (DVI) has proved to be the most effective parameter in relation to both temperature and precipitation factors in the region. Results indicated that differential vegetation index, green normalized difference vegetation index (GNDVI) and green difference vegetation index (GDVI) have a positive correlation with temperature, while there is a negative correlation between temperature and normalized vegetation index. Precipitation is considered to be one of the most important factors affecting vegetation. Results indicate that differential vegetation index, green difference vegetation index, green normalized difference vegetation index, non-linear vegetation index and normalized difference vegetation index have the highest impact on precipitation. In forest ecosystems, changes in climatic factors may affect trees differently. ConclusionCollecting information about the state of vegetation cover in forests is considered to be very important. Thus, the present study has endeavored to investigate the relationship between indices of vegetation cover and climatic variables. To reach this aim, satellite data are used as a suitable and efficient tool for investigating forest ecosystems with a relatively low cost. This provides the possibility of continuously monitoring land surface. Results indicated that climatic factors affect vegetation indices in the study area. Vegetation cover protects and stabilizes the environment and thus, many researchers have tried to investigate the growth and spatial patterns of vegetation cover in different regions. It is also suggested to study the effects of climatic factors on the vegetation cover of the study areas in different geographical directions. In addition, using other climatic factors such as relative humidity, wind speed, evaporation, transpiration, and higher resolution images can increase the accuracy of the study.
Sara Attarchi; Najmeh Poorakbar
Abstract
Extended Abstract
Introduction
Free access to the Landsat dataset and Sentinel 2 images has provided a great opportunity for long-term monitoring of resources. Landsat 8 was launched in 2013 to continue the mission of the previous Earth observation satellites. Landsat 8multi-spectral sensor, Operational ...
Read More
Extended Abstract
Introduction
Free access to the Landsat dataset and Sentinel 2 images has provided a great opportunity for long-term monitoring of resources. Landsat 8 was launched in 2013 to continue the mission of the previous Earth observation satellites. Landsat 8multi-spectral sensor, Operational Land Imager (OLI), provides multi-spectral images with 30-meter resolution. Sentinel 2 was launched in 2015 with a multispectral sensor called MSI which captures images with different spatial resolutions (10m to 60m). The secret mission of Landsat satellites started in the 1970s and they have the longest archive of satellite images collected from the Earth. Sentinel 2 offers higher spatial, spectral and temporal resolutions and therefore it is important to compare the compatibility of Sentinel 2 and Landsat 8 images. OLI and MSI sensors both operate in the optical region, thus weather conditions can impose some limitations on their data acquisition. In such circumstances, data collected by a compatible and similar sensor can replace the cloud-covered images.
Generally, spectral features of new sensors are designed in such a way toconform to the corresponding bands of the previous sensors. The present study compares the corresponding bands of MSI and OLI sensors. The efficiency of both sensors in the classification of a heterogeneous and complex region has also been investigated.
Materials & Methods
Three near-simultaneous pairs of Landsat 8 and Sentinel-2 scenes were obtained to conduct a comparative study. Images were acquired in August 2017, November 2017, and July 2018.Minudasht - in northern Iran- was selected as the study area because of the presence of different land cover classes including rainfed agricultural lands, irrigated agricultural lands, forests, residential areas, and bare lands.Thescenes were processed for further analysis. First, the scenes were atmospherically corrected. In the next step, spatial resolution of MSI bands was resampled to 30 m, and each pair of mages were geometrically co-registered. To do so, 10 tie points were selected, and scenes were co-registered usingthe first-degree polynomial method. RMSE values were reported 2.5 m, 2.4 m, and 2.8 m for August 2017, November 2017, and July 2018, respectively. To investigate the similarities and differences of the sensors’ spectral content, the correlation between corresponding bands of the two sensors was estimated.
Then, images were classified using the support vector machine (SVM) algorithm. Five distinct land cover classes were found in the region including rainfed agricultural land, gardens and irrigated agricultural land, forests, residential areas, and bare lands. The training samples were selectedfromthe land use map and high-resolution Google Earth images. Approximately 300 training samples were selected for each land cover class. The accuracy of classification results was compared to verify the efficiency of two sensors in land cover mapping. Independent validation samples were selected for each class. Overall accuracy, commission error, and omission error were calculatedbased on the confusion matrices.
Results & Discussion
The reported correlation coefficientfor all corresponding bands was higher than 0.8. Results indicate a high level of similarity between the two sensors. Similar findings were reported by previous studies. Overall classification accuracy ofOLIimagescollected in August 2017, November 2017, and July 2018 was 91. 35 %, 89.60 %, and 93.12%, respectively. Overall classification accuracy ofMSI images collected inAugust 2017, November 2017, and July 2018 was 94.76 %, 95.55 %, and 94.07%, respectively. As it is obvious, Sentinel 2showed a higher performance in comparison to Landsat’s, because of its higher spatial resolution. A medium spatial resolution image collected from a complex landscape is often composed of mixed pixels, since different land cover types exist in one pixel. As the image’s spatial resolution improves, the dimensions of each pixeldecrease. Therefore, the number of mixed pixels will decrease and a higher classification accuracy will be expected.
Conclusion
Results confirm the similarity of two sensors in land cover classification. However, the findings could not be extended to other applications. MSI sensorslacka thermal bandand thus are not applicable when such a feature is needed (for an instance inthe retrieval of land surface temperature). In such applications, MSI cannot substitute OLI. For further studies, it is necessary to compare the performance of these sensors in different regions, since different land cover types may impactclassification results. Findings of the present study may raise attention to the differences between Landsat 8- OLI and Sentinel 2 MSI. Further studies can be conducted to investigate the differences between these two sensors. The possible similarities of othersimilar sensors can also be a topic for further investigations.
Hekmatollah Mohammad Khanlu; Mahdi Modiri; Elahe Khesali; Hamid Enayati
Abstract
Introduction
Hydrography is a science used for regular measurement of parameters such as depth of water, geophysical geology, tide, water flow, waves and other physical properties of seawater. It is also used for the production of maritime maps. Hydrography contributes significantly to the internal ...
Read More
Introduction
Hydrography is a science used for regular measurement of parameters such as depth of water, geophysical geology, tide, water flow, waves and other physical properties of seawater. It is also used for the production of maritime maps. Hydrography contributes significantly to the internal infrastructure of coastal countries. Providing proper hydrographic services ensures safe and efficient sailing. Thus, development of hydrographic services on the national level can improve safety of mariners, and protect people’s lives and belongings on the sea, while providing some facilities for the protection of marine environment. The advancement of space technologies in recent years has increased the speed of spatial information production and facilitated sea monitoring.
Materials and Methods
Different methods are used for bathymetry. Lyzanga et al (1978) used a linear combination of the logarithm of corrected radiance ratio. This method is based on the simplification of Beer's physical model in which a linear equation of five unknowns is obtained for two bands. In 2006, Lyzanga et al. presented an improved version of their model. Using Tow-Bands Reflection Ratio, Stampf et al (2003) not only reduced the number of unknown variables in Lyzenga method, but also decreased the sensitivity of depth determination to different substrates. In this method, the difference between absorption properties of green and blue bands is used. TCarta is a global supplier of geospatial products. The company generated Satellite Derived Bathymetry (SDB) dataset by accurately extracting water depth from multispectral imageries received from the European Space Agency’s Sentinel-2 Satellite. The resulting bathymetric data had a point spacing of 10 meters, while measuring up to a depth of 15 meters. Data covered a 30-square kilometer area around Preparis Island on the Bay of Bengal.
The present article used images received from Sentinel-2 in 7 different periods for depth determination, and 1: 25,000 ADMIRALTY Nautical Charts for accuracy evaluation. Following the assessment of water transparency in received images, the 12/15/2018 image was used for depth determination. Case study area contains around 130 km along the Port of Salalah, Oman.
Results and Discussion
In order to implement the model, it is necessary to separate land from water in images using NDVI, NDWI, MNDWI and AWEI indices. The NDVI index has been used in this project. NDVI is primarily used to estimate vegetation cover, but since this index exhibits a negative value in areas covered with water, this property is used to provide a mask for separating land from water. In this step, 68 control points and 68 check points were selected from the existing ADMIRALTY map. The DN values of the corresponding pixels of the selected points were extracted from four 10-meter bands of Sentinel-2 images. The control and checkpoints and the DN value of their corresponding pixels were extracted in 4 separate files, then these 4 files were logged into the Bathymetry software and the parameters of LMR and Stumpf methods were calculated. The root mean square error (RMSE) and correlation coefficient (CC) were used to assess geometric accuracy. In order to extract necessary parameters for each model, RMSE= 2.15 m and CC= 92.5% were calculated at depth distances of 0 to 20m. Results indicates higher accuracy and stronger correlation of LMR findings. Therefore, this method was used for depth determination between 0 to 20 meters. The 5 parameters extracted from the Bathymetry software and the corresponding pixel values of the four bands with 10-meter resolution extracted from the Sentinel-2 image (received from the on 12-15-2018) were used as input. Linear Regression Model was applied to transform 4 bands of Sentinel-2 image into depth. The output of the model (depth) was presented as the Substrate DEM of the coasts of Port of Salaleh, Oman.
Conclusion
Hence, it can be concluded that Remote Sensing technologies can be used for depth determination and sea monitoring at critical times (during wars or other periods of insecurity) for an acceptable time period. It also provides an appropriate context for bathymetry of inaccessible coastlines and monitoring of strategic widespread water zones. In this way, the depth of sea bed in shallow areas is extracted using spectral analysis of satellite data and different models.