Document Type : Research Paper

Authors

• Atikeh Afzali ¹
• Masoud Moghnee Tabari ²

¹ PhD Graduated in Natural Resources Engineering, Watershed Management, ARYAN Institute of Science and Technology

² ,Master of degree in mapping engineering in geographic information systems , ARYAN Institute of Science and Technology

Abstract

Extended Abstract

 Introduction

Increasing population and urban development, increasing use of cars, increasing the number of private cars, Also the narrow width of the streets and the lack of supply of marginal park space, especially in the central parts, have caused many problems for large and densely populated cities. Parking lots as one of the most important urban infrastructures play a major role in reducing these problems. Today, in large cities, with the correct location of public parking lots, optimally manage of urban traffic is possible by increasing the provision of services to a large number of vehicles.

 Materials and Methods

In this research, first, effective criteria were extracted according to the opinion of Babol Municipality experts. The information layers of each criterion were prepared in the GIS environment and to equalize the layers, each criterion was classified, Then, the identified criteria were weighted using ANP technique and with the help of Super Decision software, and then pairwise comparisons were done. Weighted layers were combined by ANP method, were placed on top of each other in the GIS environment based on the influence of each layer (relative weight) and the map of the optimal areas for the construction of public parking lots was obtained. 

Results and Discussion

In this research, the inconsistency coefficient obtained was 0.07. Criteria prioritization showed that, "Distance from the road", "Distance from offices use" and "Distance from business use" criteria with a significance coefficient of 0.25, 0.24 and 0.15 respectively had the highest weights. Arc GIS software was used to prepare the final maps. Finally, suitable places for creating public parking lots were determined by applying the final weight of the criteria and overlapping the layers. According to the final location map, areas with very high potential, areas with high capability and areas with medium capability each have 3.11, 55.75 and 36.56 percent of urban lands, respectively. Areas with very high and high potential are mostly located in the northwestern, northeastern, southwestern and central parts of the city.            

Conclusion

The results indicate that the spatial distribution of existing parking lots in the city is not related to the effective criteria in these parking lots. According to the residential use map and population density and due to the epidemic of private car use, there is no match between the number of parking spaces in the city and their spatial distribution and population density. The result of urban parking location zoning using the ANP model and comparing it with existing parking lots in the city shows that The class of areas with high capacity for parking lots is located in parts of the city where there are no parking areas and there is an urgent need to create these types of users. This factor indicates that the location of existing parking lots in Babol city has been done without considering effective factors and criteria. All parking lots are located in one part of the city and at a close distance from each other. There is a need to create many public parking lots in other parts of the city, according to the urban population, until the per capita is closer to the reality. Considering the population of Babol city, which is 250,217 people, and the number of public parking lots, which is 6, this amount per capita is very low.

Keywords

• Public parking
• Modeling
• locating
• Babol city

Main Subjects

• Geographic Data